H05V-K (PVC-Single Cores, Fine wire stranded)
Quantity
Technical Data:
- PVC single cores to DIN VDE 0285-525-2-31 /DIN EN 50525-2-31 and IEC 60227-3
- Temperature Range: Flexing -5°C to +70°C , Fixed installation -30°C to +80°C
- Nominal Voltage: U0/U300/500V
- Test Voltage: 2000V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: Fi xed insatallation 4x core Ø
- Radiation Resistance: Up to 80 x 10^6 cJ/kg (up to 80Mrad)
Cable Structure:
- Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3
- Core identi cation see table below
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Note:
- The following colours are recommended: black, white, blue, grey, brown, red, orange, turquoise, violet and pink. Exceptions are the colours green and yellow; these are only permitted if the safety regulations allows. Green is permitted for the identi cation of luminous decorative chains. All 2-coloured combinations of the abovesingle colours are allowed
Application:
These single cores are determined for the installation to the inside of apparatus as well as for the protective laying to the lightings, in dry rooms, in
production facilities, switch and distributor boards, in tubes, under and surface mounting of plasters.
CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
- PVC single cores to DIN VDE 0285-525-2-31 /DIN EN 50525-2-31 and IEC 60227-3
- Temperature Range: Flexing -5°C to +70°C , Fixed installation -30°C to +80°C
- Nominal Voltage: U0/U300/500V
- Test Voltage: 2000V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: Fi xed insatallation 4x core Ø
- Radiation Resistance: Up to 80 x 10^6 cJ/kg (up to 80Mrad)
Cable Structure:
- Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3
- Core identi cation see table below
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Note:
- The following colours are recommended: black, white, blue, grey, brown, red, orange, turquoise, violet and pink. Exceptions are the colours green and yellow; these are only permitted if the safety regulations allows. Green is permitted for the identi cation of luminous decorative chains. All 2-coloured combinations of the abovesingle colours are allowed
Application:
These single cores are determined for the installation to the inside of apparatus as well as for the protective laying to the lightings, in dry rooms, in
production facilities, switch and distributor boards, in tubes, under and surface mounting of plasters.
CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
