LiY-CY(TP) (Flexible, Cu-screened, colour coded to DIN 47100, EMC friendly, meter marking)
Quantity
Technical Data:
- Special-PVC data cables
- Temperature Range: Flexing -5°C to +70°C ,
- Operating Peak Voltage: (not for purposes of high current and power installation) 500 V
- Test Voltage: 1500V
- Insulation Resistance: min. 10 MOhm x km
- Capacitance: (approx.-value) at 800 Hz, 120 pF/m
- Inductance: approx. 0,7 mH/km
Cable Structure:
- Bare copper-conductor, from 0,5 mm² to DIN VDE 0295 cl.5, fi ne-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of special PVC
- Core identi cation to DIN 47100, without colour repetition
- Cores stranded in layers with optimal lay-length
- Foil wrapping
- Tinned, copper braided screen,
- Outer sheath of special PVC
- Sheath colour grey (RAL 7001)
- with meter marking
Properties:
- Oil resistant, oil-/ chemical resistance
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to IEC 60332-1
Application:
These cables are used for flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter, LiY-CY(TP) is well suited for use in areas subject to signal interference. The high level of screening reduces substantially the eff ects of electrical disturbances from parallel running wiring etc. The copper screening is also often used as an “earth”. The twisted pairs conform favourable cross-talk attenuation values.
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
- Special-PVC data cables
- Temperature Range: Flexing -5°C to +70°C ,
- Operating Peak Voltage: (not for purposes of high current and power installation) 500 V
- Test Voltage: 1500V
- Insulation Resistance: min. 10 MOhm x km
- Capacitance: (approx.-value) at 800 Hz, 120 pF/m
- Inductance: approx. 0,7 mH/km
Cable Structure:
- Bare copper-conductor, from 0,5 mm² to DIN VDE 0295 cl.5, fi ne-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of special PVC
- Core identi cation to DIN 47100, without colour repetition
- Cores stranded in layers with optimal lay-length
- Foil wrapping
- Tinned, copper braided screen,
- Outer sheath of special PVC
- Sheath colour grey (RAL 7001)
- with meter marking
Properties:
- Oil resistant, oil-/ chemical resistance
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to IEC 60332-1
Application:
These cables are used for flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter, LiY-CY(TP) is well suited for use in areas subject to signal interference. The high level of screening reduces substantially the eff ects of electrical disturbances from parallel running wiring etc. The copper screening is also often used as an “earth”. The twisted pairs conform favourable cross-talk attenuation values.
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
