LS0H (Single core, halogen-free)
Quantity
Technical Data:
- Single cores for low emission of smoke and corrosive gases in case of fire to
- Permissible working temperature at conductor +90°C
- Nominal Voltage: LS0H = U0 /U 600/1000 V
- Test Voltage: 3500V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: approx. 10 x Ø
Cable Structure:
- Bare Cu-conductor, fi newire stranded according to cl.5, IEC 60228
- Core insulation of Low smoke halogen free compound.
- Core identi cation see table below
- LS0H = Low Smoke Zero Halogen
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: Behaviour in re self-extinguishing and flame retardant to IEC 60754 & IEC 60332-3C (equivalent DIN VDE 0472 part 804 test method B)
- Smoke density acc. to DIN EN 61034-1+2/ IEC 61034-1+2
Application:
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to
protected from further damage resulting from fire. These cables are suitable for laying in tubes on and under plaster, as well as in closed installation
ducts.
LS0H, suitable for protected, permanent laying in or on lighting installations or switching and control equipment up to 1000 V.
- Single cores for low emission of smoke and corrosive gases in case of fire to
- Permissible working temperature at conductor +90°C
- Nominal Voltage: LS0H = U0 /U 600/1000 V
- Test Voltage: 3500V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: approx. 10 x Ø
Cable Structure:
- Bare Cu-conductor, fi newire stranded according to cl.5, IEC 60228
- Core insulation of Low smoke halogen free compound.
- Core identi cation see table below
- LS0H = Low Smoke Zero Halogen
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: Behaviour in re self-extinguishing and flame retardant to IEC 60754 & IEC 60332-3C (equivalent DIN VDE 0472 part 804 test method B)
- Smoke density acc. to DIN EN 61034-1+2/ IEC 61034-1+2
Application:
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to
protected from further damage resulting from fire. These cables are suitable for laying in tubes on and under plaster, as well as in closed installation
ducts.
LS0H, suitable for protected, permanent laying in or on lighting installations or switching and control equipment up to 1000 V.
